RF BTS Filter Designer wanted - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

uwavegeek
Post subject: RF BTS Filter Designer wanted Posted: Fri Aug 12, 2005 1:05 pm
Hello, my group is presently looking for a filter designer to aid in our development of combline and DR cavity filters. We have a unique, proprietary, approach which already has several potential customers banging down our door. In short, we have too much business and can't address all of the opportunities coming our way. As you may have guessed, I'm not a recruiter but an engineer working in this group. We are located in the northeast and we are not a startup. If interested, please email me at the address below.

upstateny01@comcast.net

Thanks.

Top

Kirt Blattenberger
Post subject: Posted: Fri Aug 12, 2005 4:11 pm

Site Admin

Joined: Sun Aug 03, 2003 2:02 pm
Posts: 308
Location: Erie, PA
Greetings uwavegeek:

Your post is a perfect candidate for the new "Hiring Managers-to-Engineers" forum area. You might want to consider posting it there, too.

In fact, if you find you are receiving contacts from other than qualified engineers, moving it there could reduce the noise. I'll be glad to remove this version of the post if you request.

Thanks for participating in the RF Cafe forums..

_________________
- Kirt Blattenberger
RF Cafe Progenitor & Webmaster

Top

uwavegeek
Post subject: good to knowPosted: Mon Aug 15, 2005 1:06 am

Captain

Joined: Mon Aug 15, 2005 12:55 am
Posts: 6
Thanks Kirt, I posted there too. No real bites as of yet as this type of filter design seems to be entrenched with old school empirical methodology.

Top

dan45
Post subject: Posted: Sun Aug 26, 2007 12:21 am

Lieutenant

Joined: Sun Aug 26, 2007 12:16 am
Posts: 1
Location: San Clemente, ca
I've een designing Filters for over 27 years, pease tell me were your located

Posted 11/12/2012

Webmaster:

Kirt Blattenberger,

BSEE - KB3UON

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a nice lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom