RF Cascade Workbook for Excel
RF & Electronics Symbols for Visio
RF & Electronics Symbols for Office
RF & Electronics Stencils for Visio
RF Workbench
T-Shirts, Mugs, Cups, Ball Caps, Mouse Pads
Espresso Engineering Workbook™
Smith Chart™ for Excel
|
|
Tech/Engineer Looking for Ops - RF Cafe Forums
|
TFM Technology Post subject: Tech/Engineer Looking for Ops Posted:
Fri Mar 04, 2005 3:24 pm I have been I tech for almost 9 years,
and I have done the following:
- design VCO's 900MHZ-4.6GHz with
minimal support - extensive PCB design using Protel up to 99SE version
- turnkey manufacturing, prototyping on a contract basis - calibration
- test fixture design and implementation - Technical documents such
as test procedures and design documentation. - strong hardware design
abilities - able to learn new things with little or no assistance
- excellent problem solving skill and observation - research,
development , and data collection
This is what I can think of
off the top of my head. If you think you can use these skills. Call
954-649-0705. I will perform contractual work from my location. I also
can provide offshore sourcing for low cost PCB's as well as low cost
proffesional SMT assembly.
Posted 11/12/2012
|
Copyright: 1996 - 2024
Webmaster:
Kirt
Blattenberger,
BSEE - KB3UON
RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling
2 MB. Its primary purpose was to provide me with ready access to commonly needed
formulas and reference material while performing my work as an RF system and circuit
design engineer. The World Wide Web (Internet) was largely an unknown entity at
the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps
while tying up your telephone line, and a nice lady's voice announced "You've Got
Mail" when a new message arrived...
|
All trademarks, copyrights, patents, and other rights of ownership to images
and text used on the RF Cafe website are hereby acknowledged.
|
All trademarks, copyrights, patents, and other rights of ownership to images
and text used on the RF Cafe website are hereby acknowledged.
My Hobby Website: AirplanesAndRockets.com
My Daughter's Website: EquineKingdom
|
|
|
|