How does link budget imrpoves for antenna arrays - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

Michael

Post subject: How does link budget imrpoves for antenna arrays

Posted: Thu Apr 23, 2009 9:38 am

Lieutenant

Joined: Thu Apr 23, 2009 9:17 am
Posts: 4

I have
N antenna elements Tx array
communicating with
M antenna elements Rx array.

By how much will the link improve ?
by 20LogN + 10LogM or by 20LogN + 20LogM ?
Why?

(Compared to same link with just single identical antenna and same power, NF, distance etc)

Thanks
Michael

Loren A.

Post subject: Re: How does link budget imrpoves for antenna arrays

Posted: Tue Apr 28, 2009 1:46 pm

Captain

Joined: Fri Jul 16, 2004 4:12 pm
Posts: 11

Hi Michael

The answer isn't a simple one since it depends on the configuration of the antennas on both ends, and what your objective is. Theoretically, a system like 802.11n that uses three antennas, depends on orthogonality to realize maximum efficiency. In an ideal environment (no reflections, equal path lengths, equal antenna performance, equal TX/RX circuitry) the three orthogonal antennas independently transmit/receive energy from the same signal in all three planes, without any interaction. The receive system would add the signals.

In the real world you know that the antenna configurations have to be adjusted for best average performance in the operational environment. Same goes for two antennas or even one antenna.

For any system of antennas, the net performance depends on spacing between antennas and how the receiver handles the signals. Again, for and ideal scenario where all antennas are far apart enough to be considered independent and all signals arrive at the same phase (or can be adjusted for addition), the total received power is the sum, in watts (not dB), of the individual signals.

To get a meaningful feel for how your intended configuration will perform, a computer simulation will be needed.

Have fun.

Michael

Post subject: Re: How does link budget imrpoves for antenna arrays

Posted: Fri May 01, 2009 12:23 pm

Lieutenant

Joined: Thu Apr 23, 2009 9:17 am
Posts: 4

And what would be the answer if make assumptions that will make it easiest to answer:

-Line of sight between Tx and Rx.
-No reflections
-The single transmitter is identical to each of the N transmitters.
-The single receiver is identical to the each of the M receivers.
-The direction for the single antenna maxGain is the direction of the array maxGain
-The question is asked regarding that max gain direction

What is igain link mprovement compared to single antenna link?

10LogN +10LogM ?
20LogN +10LogM ?
20LogN +20LogM ?

Why?
Thanks

Posted 11/12/2012

Webmaster:

Kirt Blattenberger,

BSEE - KB3UON

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a nice lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom