Looking for MIL-STD 285 (A) or latest revision - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

NE8S

Post subject: Looking for MIL-STD 285 (A) or latest revision

Posted: Sat Sep 03, 2005 2:26 pm

Lieutenant

Joined: Sat Sep 03, 2005 2:11 pm
Posts: 2
Location: Wichita, Kansas

Greetings,

I am looking for a full copy of MIL-STD-285 (latest revision).

Can anyone help with this request?

Gar

ne8s@arrl.net

Joe

Post subject: MIL-STD-285

Posted: Tue Sep 06, 2005 3:03 pm

MIL-STD-285 has been cancelled. The old document is available at:
http://assist2.daps.dla.mil/quicksearch/

Enter "MIL-STD-285" in the "Document ID" box

SorenSko

Post subject: MIL-STD-285

Posted: Tue Sep 13, 2005 2:30 pm

HI

I'am a Danish student who needs the MIL-STD-285 for a project that i'am doing. I have tried downloading it from the site listed above but it dosen't work. I hope that someone would like to email it to me at Soren_laursen@hotmail.com

Thanks

Søren

tadek103

Post subject:

Posted: Wed Nov 16, 2005 6:29 am

Hi, I was there and I have downloaded this document. Ater when you open http://assist2.daps.dla.mil/quicksearch/ - in the place "Document ID" you have to write down name of document (MIL-STD-285) and then push Submit and it's all.

Posted 11/12/2012

Webmaster:

Kirt Blattenberger,

BSEE - KB3UON

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a nice lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom