WLAN in a stucco house - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

WLAN-Q&A

Post subject: WLAN in a stucco house

Posted: Thu Mar 02, 2006 3:51 pm

Lieutenant

Joined: Thu Mar 02, 2006 3:39 pm
Posts: 2

Hi folks. I do some moonlighting installing WLAN systems in homes here in San Diego during my off hours and thought you'd be interested in an unexpected (when I 1st started) problem with houses here. A lot of them are in the southwest stucco finish and that often means a mesh of chicken wire buried on all the walls (inside and outside many times). That makes WLAN signals nearly impossible over the rather large distances these huge homes need to cover. It is not uncommon for me to have to run coax to two or more locations and put access points at each just to get acceptable coverage. Another has to go outside near the pool since the signal can't get through the house wall.

I'll bet a clever hacker could collect all sorts of info about these people. You don't even need to be a hacker, really though because most of these people do not bother with any kind of security on their WLANs. I drive through neighborhoods and maintain almost continuous coverage. Who needs Starbucks when you live in San Diego? :-D

_________________
WLAN Installer

nubbage

Post subject: WLAN in a stucco house

Posted: Mon Mar 06, 2006 8:07 am

General

Joined: Fri Feb 17, 2006 12:07 pm
Posts: 304
Location: London UK

Mmmhh.
Do you know the mesh size used? Could even be that the mesh blocks 802.11b at 2.45G but allows 802.11a at 5.7G to pass thru.

Have you compared the coverage in both bands?

I guess if the mesh blocks the signal that well it makes life hard for any hacker to pick up a usable signal.

I imagine there is plenty of radiation through doors and windows, but they are not always favourably oriented.

Nubbage

Paul Chriss

Post subject:

Posted: Tue Mar 21, 2006 8:21 pm

Captain

Joined: Sat Mar 04, 2006 10:12 am
Posts: 13

I live in San Diego and had that exact problem in my 20-year-old stucco house. I finally gave up and ran network cable throughout (not an easy task, I guarantee you).

Like the other poster said, I ,too, can connect to my neighbor's unsecured WLAN just by walking outside with my notebook computer. If my house did not have the wire mesh, I could probably get away with not even subscribing to broadband service. :wink:

Posted 11/12/2012

Webmaster:

Kirt Blattenberger,

BSEE - KB3UON

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a nice lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom