Visit RFCafe.com Thanks for visiting RFCafe.net Thanks for visiting the RF Cafe Archives Thank you for visiting RF Cafe Thank you for visiting the RF Cafe Archives!

4CX250K - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

nubbage
 Post subject: 4CX250K
Posted: Mon Feb 19, 2007 9:47 am 
 
General
User avatar

Joined: Fri Feb 17, 2006 12:07 pm
Posts: 343
Location: London UK
Hi
Does anyone have a complete datasheet for the coaxial tetrode tube 4CX250K?
Everyman and his dog on the web can sell me any quatity, but no-one gives a datasheet showing which electrode is which.
BTW I have tried the Eimac web site without success, as they just give a photo image and the basic characteristics. I am really looking for the full data, preferably with circuit design graphs.

G3OAD


 
   
 
wb9jtk
 Post subject:
Posted: Mon Feb 19, 2007 10:58 am 
 
General
User avatar

Joined: Tue Dec 26, 2006 5:39 pm
Posts: 58
4cx250 K ? Cannot find that. Here is 4cx250B
The load-line graph is a scan that is not very high quality.
http://www.pentalaboratories.com/pdfs/4cx250b.pdf


 
   
 
nubbage
 Post subject:
Posted: Mon Feb 19, 2007 11:10 am 
 
General
User avatar

Joined: Fri Feb 17, 2006 12:07 pm
Posts: 343
Location: London UK
TKS OM
The 4CX250K is the same as the 250B electrically, but mechanically it is fully coaxial, and so does not use the same B8F/SK610 8pin base. It has annulus rings like the 2C39BA.
However, I cannot find anywhere which rings are the screen grid, which the control grid and which the cathode.
The heater rings are obvious enough -doh.
TKS AGN
G3OAD


 
   
 
fred47
 Post subject: 4CX250K connections
Posted: Wed Feb 28, 2007 4:00 am 
 
General
User avatar

Joined: Wed Feb 22, 2006 3:51 pm
Posts: 120
Hi!

It's simple - you can't cross concentric circles without shorting or breaking them.

So after the heater, going out from the center, you have the cathode, the control grid, the screen grid, and of course the upper enclosure is the plate. They can't come in any other order, because they're rings - cylinders - and the structure of a vacuum tube determines the positioning of the electrodes and their connections.

Good Luck!
Fred AC7--


 
   
 
nubbage
 Post subject:
Posted: Thu Mar 01, 2007 4:48 pm 
 
General
User avatar

Joined: Fri Feb 17, 2006 12:07 pm
Posts: 343
Location: London UK
Ahh-so
I had not appreciated the internal construction as well as the outside was entirely planar concentric cylinders.
Alimentary, my dear Watnot 8-)

Thanks Fred
73
Nubbage


 
   
 
sm7ovk
 Post subject:
Posted: Wed Sep 12, 2007 7:02 am 
 
Captain
User avatar

Joined: Thu Jan 11, 2007 12:59 pm
Posts: 23
Hi,

I have found a datasheet for the 4CX250K tube, but it's in "paper-format". Are you still interested? I'll can scan it and mail it to you directly.
73
Jens


 
   
 
nubbage
 Post subject:
Posted: Fri Oct 05, 2007 7:07 am 
 
General
User avatar

Joined: Fri Feb 17, 2006 12:07 pm
Posts: 343
Location: London UK
Hi Jens
Sorry for late reply. I have been on vacation and away from internet access.
(Difficult to achieve these days.)
I have now found the data sheets thanks. All is clear.






Posted  11/12/2012
RF Stencils for Visio v3.1 by RF Cafe
RF Cascade Workbook 2018 (GS) - RF Cafe
About RF Cafe Archives
Kirt Blattenberger - RF Cafe Webmaster
Copyright: 1996 - 2024
Webmaster:
    Kirt Blattenberger,
    BSEE - KB3UON

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The Internet was still largely an unknown entity at the time and not much was available in the form of WYSIWYG ...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website:  AirplanesAndRockets.com

spacer