6 element yagi-uda antenna - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.
-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
 -- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

jepoi84
 Post subject: 6 element yagi-uda antenna
Posted: Fri Jun 24, 2005 6:41 am 
 
Lieutenant

Joined: Wed Jun 22, 2005 1:37 am
Posts: 4
Location: Philippines
how to make a 6 element yagi uda antenna.. anyone can give a computations of every elements(length, distances.. etc) or is there any website on how to make an 6 element yagi antenna. thanks a lot.
 
   
 
zoommedic
 Post subject:
Posted: Sat Jun 25, 2005 12:37 am 
 
Lieutenant

Joined: Sat Jun 25, 2005 12:36 am
Posts: 2
http://www.ee.surrey.ac.uk/Personal/D.J ... giuda.html

check this site out. BUNCHES of info.
 
   
 
zoommedic
Posted: Sat Jun 25, 2005 12:39 am 
 
Lieutenant

Joined: Sat Jun 25, 2005 12:36 am
Posts: 2
Hey if you need any more help drop me a PM. I can help out, check my bio.
 
   
 
Kirt Blattenberger
 Post subject:
Posted: Sat Jun 25, 2005 10:12 am 
 
Site Admin
User avatar

Joined: Sun Aug 03, 2003 2:02 pm
Posts: 308
Location: Erie, PA
zoommedic wrote:
http://www.ee.surrey.ac.uk/Personal/D.Jefferies/yagiuda.html

check this site out. BUNCHES of info.


Greetings zoommedic:

Thanks for the great website reference. I added it to the Application Notes page on RF Cafe, and also put both the Yagi-Uda page and Dr. Jefferies Antenna Basics page. Like you said - there's a lot of good information there.


- Kirt Blattenberger :smt024
 
   
 
jepoi84
 Post subject: re: 6 element yagi-uda antenna
Posted: Sun Jun 26, 2005 12:26 am 
 
Lieutenant

Joined: Wed Jun 22, 2005 1:37 am
Posts: 4
Location: Philippines
thanks a lot...



Posted  11/12/2012