Visit RFCafe.com Thanks for visiting RFCafe.net Thanks for visiting the RF Cafe Archives Thank you for visiting RF Cafe Thank you for visiting the RF Cafe Archives!

6G 150W Attenuator - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

EMC Eric
 Post subject: 6G 150W Attenuator
Posted: Fri Dec 08, 2006 6:14 am 
 
Lieutenant

Joined: Fri Dec 08, 2006 6:08 am
Posts: 2
Hello,

I would like to find a 6GHz 150W Attenuator to design my system. Do you have any suggestions? This is because the supplies, such as Aeroflex, Bird, ... etc, no this large power attenuator. Please help. Thank you.


 
   
 
nubbage
 Post subject:
Posted: Fri Dec 08, 2006 10:55 am 
 
General
User avatar

Joined: Fri Feb 17, 2006 12:07 pm
Posts: 218
Location: London UK
I suggest an Aeroflex-Weinschel Type 49 if you just want fixed attenuation. It is rated 150W at up to 8.5GHz in a range of fixed values.

Nubbage


 
   
 
EMC Eric
 Post subject:
Posted: Sat Dec 09, 2006 12:53 pm 
 
Lieutenant

Joined: Fri Dec 08, 2006 6:08 am
Posts: 2
Thank you for your information.

Eric





Posted  11/12/2012
RF Stencils for Visio v3.1 by RF Cafe
RF Cascade Workbook 2018 (GS) - RF Cafe
About RF Cafe Archives
Kirt Blattenberger - RF Cafe Webmaster
Copyright: 1996 - 2024
Webmaster:
    Kirt Blattenberger,
    BSEE - KB3UON

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The Internet was still largely an unknown entity at the time and not much was available in the form of WYSIWYG ...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website:  AirplanesAndRockets.com

spacer