Antenna Needed - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.
-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
 -- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

Guest
 Post subject: Antenna Needed
Posted: Wed Jul 28, 2004 1:52 pm 
I am looking for a surface-mount antenna for both GSM tri-band and WLAN (2.4 GHz). Does anyone know of a source? Thanks.
 
  
 
Kirt Blattenberger
 Post subject:
Posted: Tue Aug 03, 2004 4:12 pm 
 
Site Admin
User avatar

Joined: Sun Aug 03, 2003 2:02 pm
Posts: 308
Location: Erie, PA
You might try one or more of these companies. They are probably all willing to do a custom design if there is nothing off-the-shelf that meets your needs. All came from the Antenna Vendors page on RF Cafe.

Centurion
http://www.centurion.com/home/antenna_mp.asp

Ethertronics
http://www.ethertronics.com/nav.php?section=3&page=0

gigaAnt
http://www.gigaant.com/?id=263&lang=1&state=1

Mobile Mark
http://www.mobilemark.com/antenna-line.htm

Skycross
http://www.skycross.com/products.asp


- Kirt B. :smt024
 
   
 
Guest
 Post subject:
Posted: Mon Aug 09, 2004 10:07 am 


 
  
 
ck
 Post subject:
Posted: Thu Aug 26, 2004 3:06 pm 


 
  
 
Tripp
 Post subject: Surface mount antenna
Posted: Mon Sep 13, 2004 9:45 am 
check here:

http://www.coveragesolutions.net/in-bui ... tennas.htm

if you dont see what you need, call. Ask for Traci or Richard

Thanks,

Coverage Solutions Corp.
 
  
 
Global Agents
 Post subject: Re: Antenna Needed
Posted: Tue Sep 21, 2004 8:45 am 
Anonymous wrote:
I am looking for a surface-mount antenna for both GSM tri-band and WLAN (2.4 GHz). Does anyone know of a source? Thanks.


Yes- Alan Richard offers them try VAMW70-50

info@global-agents.com
 
  
 
Radi
 Post subject: Antenna
Posted: Tue Sep 21, 2004 9:09 am 


 
  
 
Edstroyer
 Post subject:
Posted: Sat Dec 11, 2004 1:44 am 
I designed one about 3x3 cm with a lumped printed arm for 50ohm matching. I did it on Ansoft and it was pretty easy !
It works great :wink:

[/img]



Posted  11/12/2012