Visit RFCafe.com Thanks for visiting RFCafe.net Thanks for visiting the RF Cafe Archives Thank you for visiting RF Cafe Thank you for visiting the RF Cafe Archives!

Looking for help with HFSS9 - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

jander
 Post subject: Looking for help with HFSS9
Posted: Wed Jan 12, 2005 9:46 am 
 
Lieutenant

Joined: Wed Jan 12, 2005 9:34 am
Posts: 1
I am using HFSS to design a microstrip antenna. I have not too much experience with simulation program and I have problems with the definition of the ports. I am not sure which kind of ports are more suitable for my design because I need to look for at least 5 of the propagation modes and for example with a "lumped port" I can look only at one of them. :(

Have somebody of you experience in the definition of ports in microstrip structures and can give me a piece of advice to undestand how they work with HFSS?

Thank you very much :)

Jander


 
   
 
ro
 Post subject:
Posted: Fri Feb 04, 2005 7:22 pm 
Well, All i knw is u have to use lumped port !!


 
  
 
maverick
 Post subject:
Posted: Mon Feb 07, 2005 3:24 pm 
u can go to www.ansoft.com and see in the HF archives.




Posted  11/12/2012