Visit Thanks for visiting Thanks for visiting the RF Cafe Archives Thank you for visiting RF Cafe Thank you for visiting the RF Cafe Archives!

MATHCAD for Antenna Design - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

 Post subject: MATHCAD for Antenna Design
Posted: Thu Apr 06, 2006 9:38 am 
User avatar

Joined: Mon Sep 01, 2003 6:59 pm
Posts: 13
Location: Boston
Hi All,

I am looking into buying MATHCAD for doing some antenna radiation pattern work. I have use MATHCAD for many years for rudimentary calculations, but want to really have software that can calculate and plot 3-D patterns.

Does anyone recommend any really good MATHCAD books? I know there are a lot of MATHCAD books out there, but I don't want to waste time and money (especially after paying many hundreds of dollars for MATHCAD).



 Post subject: MathCAD for Antenna Design
Posted: Tue Apr 11, 2006 10:02 am 
User avatar

Joined: Mon Apr 10, 2006 12:43 pm
Posts: 25
Good day. I remember seeing a post about MathCAD for Antenna design. It was either on RF Cafe's Antenna Forum or it was on RF Globalnet's Antenna Forum.

Good luck

Posted  11/12/2012
RF Stencils for Visio v3.1 by RF Cafe
RF Cascade Workbook 2018 (GS) - RF Cafe
About RF Cafe Archives
Kirt Blattenberger - RF Cafe Webmaster
Copyright: 1996 - 2024
    Kirt Blattenberger,

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The Internet was still largely an unknown entity at the time and not much was available in the form of WYSIWYG ...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: