Visit Thanks for visiting Thanks for visiting the RF Cafe Archives Thank you for visiting RF Cafe Thank you for visiting the RF Cafe Archives!

Patch Antenna on ball grid array (BGA) - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

 Post subject: Patch Antenna on ball grid array (BGA)
Posted: Tue Nov 14, 2006 7:59 pm 

Joined: Tue Nov 14, 2006 7:51 pm
Posts: 1
Does anybody has experience with BGA?

I am designing Patch antenna on ball grid array in IE3D.

Lets change information.

How to integrated balls on patch antenna?

 Post subject: Patch on BGA
Posted: Thu Dec 21, 2006 9:47 pm 

Joined: Thu Sep 29, 2005 1:20 pm
Posts: 2
Location: Fremont, California, U.S.A

You certainly can simulate a patch on BGA on IE3D. In fact, the IE3D 11 implemented the AGIF which can convert GDSII files, Cadence Virtuoso files, and Cadence Allegro and APD files into IE3D geometry ready for simulation. BGA can be automatically built from geometry from other layouts. Please check for it. Regards.


Posted  11/12/2012
RF Stencils for Visio v3.1 by RF Cafe
RF Cascade Workbook 2018 (GS) - RF Cafe
About RF Cafe Archives
Kirt Blattenberger - RF Cafe Webmaster
Copyright: 1996 - 2024
    Kirt Blattenberger,

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The Internet was still largely an unknown entity at the time and not much was available in the form of WYSIWYG ...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: