Visit RFCafe.com Thanks for visiting RFCafe.net Thanks for visiting the RF Cafe Archives Thank you for visiting RF Cafe Thank you for visiting the RF Cafe Archives!

Phased Array Simulator - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

danelad
 Post subject: Phased Array Simulator
Posted: Sat Nov 24, 2007 3:03 pm 
 
Lieutenant
User avatar

Joined: Thu Mar 09, 2006 4:56 pm
Posts: 1
Location: Israel
Looking for free calculator or other simulator for phased array calculation

_________________
ddd


 
   
 
Feng
 Post subject: Antenna and EM Modeling with Matlab
Posted: Thu Dec 06, 2007 4:00 am 
 
Captain
User avatar

Joined: Sun Mar 19, 2006 5:25 pm
Posts: 21
Location: Burnaby
Hi danelad,

There is a book named Antenna and EM Modeling with Matlab published by Wiley may have similar code that you are looking for. I do have this book in my hand, so you may check it by yourself.

Good luck!


 
   
 
imodelit_moderator
 Post subject: Phased Array Simulator
Posted: Tue Jan 08, 2008 2:39 am 
 
Captain
User avatar

Joined: Wed Jun 20, 2007 3:01 am
Posts: 22
Dear danelad

Check these online applets: http://www.imodelit.com/ViewProducts.aspx?CID=92 Thanks.

Best Regards,
imodelit Moderator






Posted  11/12/2012
RF Stencils for Visio v3.1 by RF Cafe
RF Cascade Workbook 2018 (GS) - RF Cafe
About RF Cafe Archives
Kirt Blattenberger - RF Cafe Webmaster
Copyright: 1996 - 2024
Webmaster:
    Kirt Blattenberger,
    BSEE - KB3UON

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The Internet was still largely an unknown entity at the time and not much was available in the form of WYSIWYG ...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website:  AirplanesAndRockets.com

spacer