Visit RFCafe.com Thanks for visiting RFCafe.net Thanks for visiting the RF Cafe Archives Thank you for visiting RF Cafe Thank you for visiting the RF Cafe Archives!

Radiation Hazard analysis - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

Koos
 Post subject: Radiation Hazard analysis
Posted: Wed Sep 30, 2009 7:12 am 
 
Captain

Joined: Wed Sep 30, 2009 2:26 am
Posts: 6
Does anybody have the program to establish what the radiation hazard is of a specific satellite dish, say for instance an Andrew 9.3m antenna? Andrew use to have it on their website but they have removed it!


 
   
 
troy
 Post subject: Re: Radiation Hazard analysis
Posted: Thu Oct 01, 2009 9:46 am 
 
Captain
User avatar

Joined: Mon Feb 25, 2008 4:53 pm
Posts: 8
Hello.

I would just give them a call and ask to speak to an applications engineer:
North America
Telephone, Toll Free: +1-800-255-1479
Any Location (International) to U.S.A.
Telephone: +1-779-435-6500

Or, submit your question their form:
http://awapps.commscope.com/contactus/contact.aspx?ct=5






Posted  11/12/2012