Visit RFCafe.com Thanks for visiting RFCafe.net Thanks for visiting the RF Cafe Archives Thank you for visiting RF Cafe Thank you for visiting the RF Cafe Archives!

antenna designer interview questions - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

ac350
 Post subject: antenna designer interview questions
Posted: Thu Feb 17, 2005 12:30 pm 
Hey all,
I'm an RF/Microwave engineer, a recent grad., with very little antenna design exp. The only antenna design experience i have(if you can call it that) is feed network of phased arrays made up of phase shifters for X-band radar apps at my current position. I am interviewing for a microwave/antenna design position next week. They already know I am inexperienced per our phone interview, but I was just wondering if anyone had any tips on interview questions an employer might ask for this kind of position? I know its vague but I was just wondering what I should brush up on as 'basics' in the field since they know that I am a novice, but are expecting some knowledge. Thanks in advance for any help!
-AC


Posted  11/12/2012