[color=red] need help simulate a microstrip array on a cone - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.
-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
 -- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

bbvv
 Post subject: [color=red] need help simulate a microstrip array on a cone
Posted: Mon Sep 11, 2006 9:41 am 
 
Lieutenant

Joined: Mon Sep 11, 2006 6:07 am
Posts: 3
--------------------------------------------------------------------------------

Hy

I have to simulate a microstrip array on a cone shape .
I have already did it on a cylinder but i have problem constructing the array on a cone .

even if i enlarge the mesh density the eror remain.

there is another problem fixing the discrete port if i have several layers.

thanks in advance


[/img]
 
   
 
nubbage
 Post subject:
Posted: Tue Sep 12, 2006 6:25 am 
 
General
User avatar

Joined: Fri Feb 17, 2006 12:07 pm
Posts: 218
Location: London UK
Hi
What simulation software have you used?

If the stripline is to radiate, NEC should do the job OK
 
   
 
bbvv
 Post subject:
Posted: Tue Sep 12, 2006 1:02 pm 
 
Lieutenant

Joined: Mon Sep 11, 2006 6:07 am
Posts: 3
[quote="nubbage"]Hi
What simulation software have you used?




I used CST .

[/img]

http://images.elektroda.net/75_1157835876.JPG

http://images.elektroda.net/35_1157781790.JPG




Posted  11/12/2012