Visit RFCafe.com Thanks for visiting RFCafe.net Thanks for visiting the RF Cafe Archives Thank you for visiting RF Cafe Thank you for visiting the RF Cafe Archives!

coupler - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

hafidz
 Post subject: coupler
Posted: Thu Mar 08, 2007 8:53 pm 
 
Lieutenant

Joined: Sat Feb 17, 2007 7:28 am
Posts: 2
Location: malaysia
hye..
Does anyone knows where i can get the information bout the coupler??

tq


 
   
 
tmntRF
 Post subject:
Posted: Thu Mar 29, 2007 10:14 am 
 
Captain
User avatar

Joined: Thu Mar 08, 2007 10:29 am
Posts: 6
Obviously, you can try Googling which will give you lots of info about microwave/RF couplers. would narrow down ur search if you specify what coupler you want, i.e. directional coupler, loop coupler, probe coupler etc.....

in fact, some textbook i would recommend are:
1) Microwave Engineering by David Pozar
2) Introduction to Electromagnetic Fields by Clayton Paul et al
3) RF components and circuits by Joe Carr...

hope these help....


 
   
 
imodelit_moderator
 Post subject: coupler
Posted: Wed Jun 20, 2007 3:33 am 
 
Captain
User avatar

Joined: Wed Jun 20, 2007 3:01 am
Posts: 22
Dear hafidz,

These online tools may help. http://www.imodelit.com/ViewProducts.aspx?CID=95

Best Regards,
imodelit Moderator




Posted  11/12/2012
RF Stencils for Visio v3.1 by RF Cafe
RF Cascade Workbook 2018 (GS) - RF Cafe
About RF Cafe Archives
Kirt Blattenberger - RF Cafe Webmaster
Copyright: 1996 - 2024
Webmaster:
    Kirt Blattenberger,
    BSEE - KB3UON

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The Internet was still largely an unknown entity at the time and not much was available in the form of WYSIWYG ...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website:  AirplanesAndRockets.com

spacer