Visit RFCafe.com Thanks for visiting RFCafe.net Thanks for visiting the RF Cafe Archives Thank you for visiting RF Cafe Thank you for visiting the RF Cafe Archives!

designing the arrray of inset fed microstrip patch antenna - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

hafidz
 Post subject: designing the arrray of inset fed microstrip patch antenna
Posted: Sat Feb 17, 2007 7:54 am 
 
Lieutenant

Joined: Sat Feb 17, 2007 7:28 am
Posts: 2
Location: malaysia
I am having a problem to design the array of the inset fed microstrip patch antenna. What should i do first to design the array, how to design it? I am going to fabricate this antenna on the FR4 substrate, so does it take into account the characteristics of the FR4?




Posted  11/12/2012