matlab for antenna simulation - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.
-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
 -- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

star99
 Post subject: matlab for antenna simulation
Posted: Wed Dec 14, 2005 6:38 pm 
 
Captain

Joined: Wed Dec 14, 2005 4:47 am
Posts: 9
hi freinds
i need program with matlab for antenna simulation that in first of program get "L" and give "E" and "H" and drawing "E" and "H" and get "f" and give antenna pattern 1D and 3D and get maximum input current (phase and amplitude) and give "radiated resistance" and directivity and drawing current of antenna . and if move feeder from middle of antenna to desire point all above parameters calculate again.
please guide me
thank you for your help
 
   
 
bkd
 Post subject:
Posted: Fri Dec 30, 2005 11:58 am 


 
  
 
star99
 Post subject:
Posted: Tue Jan 03, 2006 1:05 pm 
 
Captain

Joined: Wed Dec 14, 2005 4:47 am
Posts: 9
i have the program for this project but it is not full
and it has not " if move feeder from middle of antenna to desire point all above" i upload it 1.5kbyte
h**p://rapidshare.de/files/10323367/Antenna.m.html
please guide me for improve its
thanks
 
   
 
star99
 Post subject:
Posted: Sat Jan 07, 2006 7:16 am 
 
Captain

Joined: Wed Dec 14, 2005 4:47 am
Posts: 9
i read book about matlab and of course Em modeling but this book"em modeling" is for professional purpose but i need elementry guide :HOW CAN WRITE PROGRAM WITH MATLAB if move feeder from middle of antenna to desire point all PARAMETERS FOR ANTENNA CALCULATED?
PLEASE GUIDE ME THAT IS VERY IMPORTANT
WITH THANKS FOR YOUR ATTENTION
 
   
 
babu
 Post subject: hi
Posted: Wed Jan 18, 2006 10:13 am 
i need matlab program for patch antenna



Posted  11/12/2012