Visit RFCafe.com Thanks for visiting RFCafe.net Thanks for visiting the RF Cafe Archives Thank you for visiting RF Cafe Thank you for visiting the RF Cafe Archives!

meander line using cst simulation - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

lee85
 Post subject: meander line using cst simulation
Posted: Fri Dec 14, 2007 12:30 pm 
 
Captain
User avatar

Joined: Fri Dec 14, 2007 11:23 am
Posts: 9
Location: malaysia
hello everyone...

i am new with cst software. now i am doing to design meander line with dual sleeve with range 400-470MHz

the problem that i don't know how to draw the sma connector with the ground plane.....

so anyone can help me...

thanks


 
   
 
Feng
 Post subject:
Posted: Mon Dec 17, 2007 1:21 pm 
 
Captain
User avatar

Joined: Sun Mar 19, 2006 5:25 pm
Posts: 21
Location: Burnaby
Hi Lee85,

I have a paper about meander line antenna for mobile application. However, the operating bands mentioned are 900MHz, 1800MHz and 2.4GHz and it is written in Chinese. If you need it, I can send it for your.


 
   
 
lee85
 Post subject: meander line using cst simulation
Posted: Mon Dec 17, 2007 9:57 pm 
 
Captain
User avatar

Joined: Fri Dec 14, 2007 11:23 am
Posts: 9
Location: malaysia
hi Feng

thanks for the information yeah u can send email to kyg_ilham@yahoo.com
n if u have in english also can

thanks a lot

regard
lee85 :)


 
   
 
Feng
 Post subject:
Posted: Mon Dec 17, 2007 11:43 pm 
 
Captain
User avatar

Joined: Sun Mar 19, 2006 5:25 pm
Posts: 21
Location: Burnaby
Hi Lee85,

I've already sent it to your email box, you may check it later. Hope it is helpful for you.


 
   
 
lee85
 Post subject:
Posted: Mon Jan 14, 2008 12:35 pm 
 
Captain
User avatar

Joined: Fri Dec 14, 2007 11:23 am
Posts: 9
Location: malaysia
Hi Feng,

thanks for the information....
now i am doing to design the meander line antenna but i have a few question

* do you use CST 2006 to design antenna before this?
if you use the cst may i know how to read the far-field result from simulation
in cst because i'am new with cst

thanks,
regards,
lee85





Posted  11/12/2012