Visit Thanks for visiting Thanks for visiting the RF Cafe Archives Thank you for visiting RF Cafe Thank you for visiting the RF Cafe Archives!

omni antenna - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

 Post subject: omni antenna
Posted: Sat May 08, 2004 9:48 pm 
:wink: Hi out there, can any body tell me how to make an omnidirectional vhf tv antenna for channel 10?
I have a LPTV station (100w) and I cut a yagi antenna for that frecuency (about 200 mhz), it works fine, but I wanna try with an omnidirectional.

Any body can help?


 Post subject:
Posted: Mon May 10, 2004 3:42 pm 
Sure... go on the net and look up "squalo antenna" or "big wheel antenna". Should be plenty of plans. You'll just have to scale it accordingly.

Posted  11/12/2012