Visit RFCafe.com Thanks for visiting RFCafe.net Thanks for visiting the RF Cafe Archives Thank you for visiting RF Cafe Thank you for visiting the RF Cafe Archives!

signals in phase - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

wallace0075
 Post subject: signals in phase
Posted: Fri Feb 11, 2005 6:37 am 
 
Lieutenant

Joined: Fri Feb 11, 2005 6:32 am
Posts: 4
hi everybody,

I have a question:
I have two signal generators. I´d like to make two signals 1900MHz with a phase between them. In the generators there is a option where you can chenge the starting phase. If I put this two signals made in a power combiner in your opinion they will be stable in phase. I mean the different phase between them will be always the same. Of course they are syncronized

Thanks in advance, wallace0075


 
   
 
wallace0075
 Post subject:
Posted: Fri Feb 11, 2005 6:38 am 
 
Lieutenant

Joined: Fri Feb 11, 2005 6:32 am
Posts: 4
I´m sorry...

I have written in the wrong forum.

Wallace0075



Posted  11/12/2012