Low frequency Stability - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

msmith
Post subject: Low frequency Stability Posted: Wed Feb 27, 2008 11:22 pm

Lieutenant

Joined: Wed Feb 27, 2008 11:12 pm
Posts: 1
hey all...

i'm new too all this...hope to learn from this forum.

what's the best way to obtain stability for HBT for 50 MHz to 1 GHz band for values for IC design. I tried feedback but the Cfb in the feedback loop is having too much affect on the bandwith and requires a big values for IC design (close to 40 pF). Shouldn't Cfb actually just provide blocking without much affecting the ac response? thanks a lot!!

Posted 11/12/2012