RFIC consultant - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.
-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
 -- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

NF
Post subject: RFIC consultant Posted: Tue May 16, 2006 4:57 pm

Lieutenant

Joined: Tue May 16, 2006 4:52 pm
Posts: 3
Does anyone know of an RFIC CMOS consultant who specializes in low-power design ?


Top

Stephen
Post subject: RFIC consultantPosted: Wed Jun 21, 2006 9:23 pm

Captain

Joined: Wed Jun 21, 2006 8:33 pm
Posts: 21
Location: Queen Creek, Arizona
This is an old post but I know a few who may be useful...the question is what do you mean by low power?..I assume you mean a low power RF design, not low power digital/analog design on a integrated RF product...in CMOS, both of these options are very common and the latter is usually the case. This is usually the case because the RF power can be insignificant, when compared to even the digigal leakage current when we are dealing with CMOS RF integrated products.
If your still checking, get back with more info.

_________________
CMOS RF and Analog ESD Specialist!
www.srftechnologies.com

Top

NF
Post subject: Posted: Thu Jun 22, 2006 3:39 pm

Lieutenant

Joined: Tue May 16, 2006 4:52 pm
Posts: 3
actualy we are looking for an RFIC expert for 90nm at 1.2V to help design an RF block


Top

Stephen
Post subject: Posted: Thu Jun 22, 2006 4:23 pm

Captain

Joined: Wed Jun 21, 2006 8:33 pm
Posts: 21
Location: Queen Creek, Arizona
A few more questions then:

What type of Block? LNA, Mixer, TX?

Can the work be offsite, if not, where are you located?

Permanent position or temporary?

I have several contacts who I have worked with on RF CMOS designs.

_________________
CMOS RF and Analog ESD Specialist!
www.srftechnologies.com







Posted  11/12/2012