Zero IF Mixer Simulation - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.
-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
 -- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

Guest_Can
Post subject: Zero IF Mixer Simulation
Unread postPosted: Sat Jan 29, 2005 8:02 pm

Hi All,
I was just wondering that anybody has an idea about how to simulate Zero-IF Mixer (RF-LO= 0Hz) using ADS or some other software.
I tried my with ADS but it is unable to do harmonic balance simulation for this kind of mixer.
I am using behavioral model from the ADS system's library.
Or is it possible to get these results by using Simulink.
I am really stuck at this point , so any help will be greatly appreciated.

N.B: i noticed in this forum there are quite smart guys, so i can hope for the best.

Regards,

Tony



Posted  11/12/2012