how to design harmonic mixer - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

phidias
Post subject: how to design harmonic mixer Posted: Wed Jul 11, 2007 5:17 am

Lieutenant

Joined: Wed Dec 13, 2006 8:57 pm
Posts: 1
how to?

Top

nubbage
Post subject: Posted: Mon Jul 23, 2007 11:02 am

General

Joined: Fri Feb 17, 2006 12:07 pm
Posts: 218
Location: London UK
Hi
Most of the recent design descriptions seem to be on pay-per-view university and patent research sites.
However, Microwave Journal January 2000 published a design that is fairly well described in some detail, for K band. Paper by Matjaz Vidmar.
I Googled under "anti-parallel" and "mixer" and found a few useful descriptions.
The Radio Society of GB published a design attributed to a Russian designer, but I cannot remember when exactly. This was the same as the MWJ one in Fig 2 "conventional design".
Good luck

Posted 11/12/2012