RF / MW Engineer needed in Long Island NY - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.
-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
 -- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

Artemis
Post subject: RF / MW Engineer needed in Long Island NY Posted: Tue May 13, 2008 5:23 pm

Lieutenant

Joined: Mon May 12, 2008 2:58 pm
Posts: 1
RF/Microwave Test Engineer - Full Time postion available on Long Island,NY.
Will consider entry level through experienced applicants.

Duties and Responsibilities

- Test and tune RF/Microwave Devices, up to 35 GHz
- Troubleshoot production microwave integrated systems to the component level
- Documentation of specifications and changes made to hardware
- Characterization of devices
- Frequency domain testing including Vector Network Analyzers, Spectrum Analyzers and S-parameters
- Evaluate mechanical, electrical, and thermal performance of components and systems
- Set up and maintain lab space, tools, and materials of a hardware R&D lab
- Monitor and maintain production flow and inventory
- Interface with component manufacturers to replenish stock for production

Requirements

- Bachelors or Masters in Electrical / Computer Engineering ( BSEE, BSCE, MSEE or MSCE) or similar
- Undergraduate / Graduate coursework in RF / Microwave / Radar Engineering
- Possess a strong electrical / electronics engineering aptitude
- Candidates must be a United States citizen for security clearance purposes
- Very high level of attention to detail; noticing and responding to contributory factors
- Excellent communication and documentation skills

Additional Desired Skills

- Ideally a minimum of two years experience in RF / Microwave Engineering.
- Experience performing hands on product design, development and implementation
- Solid understanding of typical lab test equipment such as Spectrum Analyzers, Vector Network Analyzers, Oscilloscopes, Noise Figure meters, Frequency sources and data acquisition systems
- Design and implementation of FPGA’s using VHDL
- Ability to implement digital content into designs
- Good understanding of the physics underlying electrical, electronic, mechanical and thermal devices.
- Able to read and understand mechanical drawings and electronic schematics.
- Rework skills that include soldering/de-soldering of SMT devices
- Familiarity with AutoCad, MW Office, Iso Pro softwares
- Experience using circuit prototyping routers
- Knowledge of quality standards such as ISO 9000:2000, J-STD-001, IPC-610 is a plus.

Please send resumes to:
Info@artemisinc.net
ARTEMIS Inc.
36 Central Ave
Hauppauge, NY 11788


Post approved by Kirt Blattenberger




Posted  11/12/2012