ARM7 (SAM7X) based boards for sale - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.
-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
 -- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

tasbihmr
 Post subject: ARM7 (SAM7X) based boards for sale
Posted: Tue Mar 01, 2011 1:38 pm 
 
Lieutenant

Joined: Tue Mar 01, 2011 11:40 am
Posts: 1
Hello,
I have a number of boards for sale. These are completely tested and new.
Please visit this site: http://www.mazelea.com.
The small one measures 3x4 centimeters, and includes all the functionality and I/O, other than the Ethernet.
The boards also include special parallel port JTag included, but you would need parallel port on the PC to run it.
Regarding RF, these are not really RF, the onboard frequency is around 18 Mhz, but it is possible to interface RF chips, for example matching single chip Zigbee modules, these should be built according to the 2.4 Mhz spec. for these types modules and interfaced over the SPI, so all that needs to get done is attach the SPI lines from such a module to the already prepared modules you see at this website, or redesign the original boards with the Zigbee chip onboard, and then run and compile the appropriate software.
If you need more data and the prices, E-Mail me at info@mazelea.com.
Best regards,
Maziar




Posted  11/12/2012