Recommended RF cable RG type for WiMAX - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.
-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
 -- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

ssabir
 Post subject: Recommended RF cable RG type for WiMAX
Posted: Tue May 13, 2008 12:52 am 
 
Lieutenant

Joined: Tue May 13, 2008 12:44 am
Posts: 1
Location: Bangalore
Hi,

What is cable specification required for WiMAX Application? What type we need to select for ndoor and outdoor applications.

Thanks in advance.

SABIR
 
   
 
nubbage
 Post subject:
Posted: Wed May 14, 2008 10:42 am 
 
General
User avatar

Joined: Fri Feb 17, 2006 12:07 pm
Posts: 304
Location: London UK
Hi ssabir
The question you raise is too general to give advice because there are many RG cables with low loss.
You need to do a loss budget for the system you plan to implement based on transmitter power, antenna gain, bandwidth, receiver sensitivity etc. From this, a maximum tolerable loss in the feeder cables can be estimated. Based then on the physical layout constraints of distance between electronic units and the radiating system, you can calculate the maximum tolerable loss per meter. From that you look up the data sheets to find the nearest match.
Hope that helps.




Posted  11/12/2012