|
|
Hittite Press Release - April 14, 2011
|
Hittite's New Ultra-Low Noise Tri-Band Frequency PLLs with Integrated VCO
- Excellent Phase Noise & Spurious Products Performance is Ideal for Cellular/4G Infrastructure
Chelmsford,
MA, 04/14/2011 – Hittite Microwave Corporation, the world class supplier of complete MMIC based solutions for
communication & military markets has launched two full-featured Fractional-N PLLs with integrated Voltage
Controlled Oscillators (VCOs). The
HMC837LP6CE and
HMC840LP6CE include a
wideband, low noise VCO with auto-calibration subsystem, low noise PFD and dividers, and a precision charge-pump.
The
HMC837LP6CE and
HMC840LP6CE feature
exact frequency mode operation, deliver exceptional phase noise and industry-leading spurious performance while
consuming only 630 mW. No other pre-packaged PLL solution is capable of reliably delivering this level of phase
noise performance: -227 dBc/Hz Figure-Of-Merit (FOM) in fractional-N mode and -230 dBc/Hz FOM in integer-N mode.
The integrated double side band phase noise for these products is lower than -50 dBc. The RMS jitter is less than
180 fs.
The
phase detector (PD) features cycle slip prevention (CSP) technology to allow faster frequency hopping times. Ultra
low in-close phase noise and low spurious also allows wider loop bandwidths for faster frequency hopping and low
micro-phonics.
With common channel spacing (200 kHz, 20 kHz loop bandwidth), Spurious-Free Dynamic Range
(SFDR) of 78 dB is typical. Even under worst case conditions, with the synthesizer tuned very close to an integer
multiple of the comparison frequency, SFDR still exceeds 52 dB.
The
HMC837LP6CE is tunable
over three separate frequency bands: 1025 MHz to 1150 MHz, 2050 MHz to 2300 MHz, and 4100 MHz to 4600 MHz. The
HMC840LP6CE is tunable
over three separate frequency bands: 1310 MHz to 1415 MHz, 2620 MHz to 2830 MHz, and 5240 MHz to 5660 MHz. Both
the
HMC837LP6CE and the
HMC840LP6CE are housed
in 6 x 6 mm plastic leadless surface mount packages and provide excellent temperature stability from -40 °C to +85
°C. Released data sheets may be found at www.hittite.com. Samples and evaluation PC boards are available from
stock and can be ordered via the company's e-commerce site or via direct purchase order.
About Hittite Microwave Corporation Hittite Microwave Corporation is an
innovative designer and manufacturer of high performance integrated circuits, or ICs, modules, subsystems and
instrumentation for technically demanding digital, RF, microwave and millimeterwave applications covering DC to
110 GHz. The Company's standard and custom products apply analog, digital and mixed-signal semiconductor
technologies, which are used in a wide variety of wireless/wired communication and sensor applications for
Automotive, Broadband, Cellular Infrastructure, Fiber Optics, Microwave & Millimeterwave Communications, Military,
Test & Measurement, and Space markets. The Company is headquartered in Chelmsford, Massachusetts.
Contact Beth McGreevy MarCom Manager
mcgreevy@hittite.com
Hittite Microwave Corporation 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343
FFax: 978-250-3373
sales@hittite.com www.hittite.com
Posted 4/16/2011 |
|
|